Last night I did some work to get the parts ready for the wingtip bow supports on the rear spars. I ended up not gluing them on, since I’ve got to think a little more about how I’m going to clamp the pieces together. I did get the stiffeners glued to the rear face of the upper rear spars.
Up until now everything I’ve done with the spars has resulted in parts that were still interchangeable. Main spars are identical and fore/aft symmetrical, so there’s no right or left side. The rear spars are not fore/aft symmetrical, so now I have a left and a right upper rear spar. I had to take just a few minutes extra to make sure everything was properly oriented before attaching those stiffeners, or I could end up with two left or two right spars. Needless to say, there are some extra pencil markings on them…