Today we got the ends of the wingtip bows trimmed to length, and the wingtip supports trimmed to fit. I want to get the bows routed or sanded to their final shape before gluing them in, so that’s going g to need to wait a bit. I did cut the corner blocks for both ends.
The CW36 aileron bay end plates aren’t as bad as I thought, and the holes can be modified as needed, so I glued them in place. I also cut and glued in the remaining aileron spar stiffeners and the plywood piece that will hold the bracket for the aileron connecting rod. I think that’s everything I feel comfortable doing before getting the torque type in place. I also need to stop at Lowe’s Aviation Department to pick up a little chunk of 1” PVC pipe. The Celebrity uses 3/8” slices of plastic pipe to keep the ailerons centered in the aileron bays.
I was pretty chuffed. I estimated it would take about 8 cc of glue for everything I wanted to glue today… so I mixed up 8 cc, and ended up with almost nothing left over.
