I built two more ribs last night and took them out this morning; I’m up to 14 now. I’m trying to 3D print some clamps too use on one of the jigs that has locating blocks too thick to use the small red sprig clamps I bought. of course first I have to fix the 3D printer…
When I used the steam box, the door warped — no, curled outward. I flattened it out, but because everything isn’t perfectly square it really only fits on one way so I can’t just flip it over. Tonight I cut a couple of 3/4″ square stiffeners and epoxied them to the outside of the door. I need to bend some more pieces of capstrip, and I can’t do that until the door is usable. We’ll see if this is enough or not, should be interesting at least.