Today I picked up some flat bar stock from Millard Metals. The Celebrity wings use fittings of various sizes to attach flying wires, landing wires, N struts, and of course to attach the wings to the fuselage. These are made from 1/8″ and 3/16″ 6061-T6 and 3/16″ 2024-T4. I ordered some 6061 tubing from Aircraft Spruce to use as bushing stock. It will take me a while to get all of the brackets cut and drilled, but I did cut at least one of each piece and marked them for the bolt holes. I’ll drill them with small pilot holes, and once they’re all ready I can start drilling the spars for the bolts to attach them. Once those holes are drilled we can start assembling the first wing. I can install the bushings after the wing is assembled, but the holes need to be drilled first.
